How to use CN900 4D decoding

View previous topic View next topic Go down

How to use CN900 4D decoding

Post by Guest on Mon Feb 24, 2014 11:01 am

CN900 is a powerful auto key programmer,supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.Can directly copy 4C and 4D chips, can copy such as Toyota 4d67.CN chips can be copied many times.Can recongize locked ID48 and can unlock ID48.now i will show that how to use it.
1.First be sure the CN900 key programmer is the latest or higher Version 1.25.3.35


2.Please connect the CN900 with the 4D DECODE BOX before turn on the power.After Then turn on the power.


3..Please insert the 4D key which you want to copy in the testing hole of CN900 .Click the Identify&Copy button Of the CN900 Do not move the 4D key and keep it in the testing hole of CN900 .And then click the "decode" button of CN900


After click the Decode button then it start to decode.(Notice: Do not move the 4D key which you want to copy) Till you see "decode" this word on the CN900 screen become copy this word then it mean decoding successfully.


After decode successfully then you can remove the 4D key from the testing hole of the CN900 and put CN 2 chip in the smaller hole of CN900 and click the button and wait for few seconds then it will show the copy successful then it means this CN2 chip already have the same information as the 4D key and it can start the car.

Guest
Guest


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum